Keep this beside you while you work
Your HOPPE gearbox repair checklist
For a compatible, manual HOPPE HLS 9000 multipoint lock. Use alongside the full installation guide.
Before ordering
- Check looseness, friction and door alignment before assuming the gearbox has failed.
- Confirm HOPPE stamp, cylinder below the handle, manual operation, multiple locking points, current-style stainless steel faceplate and 92 mm handle-to-cylinder spacing.
- Measure from the face of the faceplate, not the bare case or wood edge.
Backset: __________ mm / inches
Fully extended deadbolt throw: __________ mm / inches
Handle-to-cylinder spacing: __________ mm (must be 92 mm)
Have these ready
- #3 tri-wing bit and hand bit holder for the case-to-extension screws.
- 3 mm hex key, Phillips screwdriver and tape measure.
- A clear work surface for the long lock assembly, and time to leave the door open.
During the repair
- Keep the door open and secured. Remove the cylinder, handles, spindle and lock assembly following the installation guide.
- Compare old and new gearboxes before disconnecting the old one. Stop if they do not match.
- Swap the case, connecting the lower extension and then the upper. Check the latch direction.
- Refit the lock, cylinder and handles. Tighten screws by hand without overtightening.
Before closing the door
- With the door open, operate the lock as described in the guide. Test every locking point.
- Confirm every bolt fully extends and retracts. If it binds, keep the door open and get help.
- Retract the deadbolt and every locking point before closing.
This checklist is a reminder, not a complete installation procedure. Full instructions: hoppemultipointlockreplacement.com/install.html. For a locked-shut door or a lock you cannot operate safely, contact a locksmith or door installer familiar with multipoint locks.
Shootbolt support: support@shootbolt.com · (816) 568-9218
Monday–Friday, 8 am–4 pm Central. Photo inquiries answered by email within 1 business day.
The part
HOPPE HLS 9000 replacement lock case
- Genuine HOPPE part, in six sizes
- Choose your size for price and availability
- Free US shipping and 90-day free returns
More help with this repair
Which handle problem do you have?Drooping, loose, stiff or stuck: tell them apart and find the part.Lock case or whole lock?Three sizes of repair, and how to tell which one your door needs.Is your lock a HOPPE HLS 9000?Five checks at the door's edge, with photos.How to measure for your sizeWhere to put the tape for backset, throw and handle spacing.How the lock case is replacedEvery step, the tools to have ready and how to test it.Questions and answersFit, the repair, shipping, returns and who we are.