How multipoint locks work
One handle, several bolts. Here is what happens inside the door.
A multipoint lock holds the door shut at several points along its edge, not just at the handle. How you work it tells you which kind you have.
What is a key-operated multipoint lock?
A key-operated multipoint lock throws all its bolts when you turn the key or thumbturn. There is no handle to lift. HOPPE's catalog says to turn the outside key or inside thumbturn two turns to lock, and two turns to unlock.
On this kind of lock, the handle works the latch only. HOPPE makes it in two versions, and the difference matters for getting out:
- Standard: the inside handle pulls back the latch only, so you turn the thumbturn back to leave.
- Egress: the inside handle pulls back the latch and any extended bolts in one push.
Key-operated locks are common on large pivot doors. Endura's Trilennium is another key-operated design found on US doors: the key throws its bolts, and the inside lever releases them all.
It is one of three ways a multipoint lock is worked:
| Type | How you lock it | How you unlock it |
|---|---|---|
| Lift-to-lock (manual) | Lift the handle, then turn the key or thumbturn | Key or thumbturn back, then push the handle down |
| Key-operated | Turn the key or thumbturn; no lift | Turn it back |
| Automatic | Shut the door; the points throw by themselves. Then the key or thumbturn for the deadbolt, where there is one | Key or thumbturn back, then push the handle down |
The lock case on this site is for the lift-to-lock (manual) HOPPE HLS 9000 only. HOPPE's key-operated lock is a different lock, with a wider faceplate, and an automatic lock takes a different part.
How does a multipoint door lock work?
The handle turns a square bar, the spindle, inside a box behind the handle: the lock case, also called the gearbox. The gearbox turns that movement into up-and-down travel of a flat bar hidden behind the faceplate. That bar pushes every locking point out of the door's edge together.
Where the gearbox sits
The gearbox is set into a pocket cut in the door's edge, at handle height. It holds the latch, the deadbolt and the hub the handle turns. The key cylinder slides through the door and the gearbox, and turning it throws the deadbolt. Above and below the gearbox, the extensions carry the movement to the upper and lower locking points.
The parts you see on the door's edge
- Latch: the angled bolt that holds the door closed when you shut it.
- Trigger: a small spring plunger beside the latch. It stops the locking points firing while the door is open. Closing the door presses it in.
- Deadbolt: the square bolt near the handle, thrown by the key or thumbturn.
- Locking points: hooks, tongues, rollers or round bolts above and below the handle.
- Shootbolts: bolts at the top and bottom of the door that slide into the frame.
Locking a lift-to-lock door
Close the door.
Lift the handle all the way up. That throws the locking points.
Turn the key outside, or the thumbturn inside. That throws the deadbolt. On a HOPPE manual lock, the deadbolt won't throw until the handle is lifted.
To unlock, turn the key or thumbturn back first, then push the handle down. Handle up is not locked. Pella warns that a door with only the handle lifted can still be opened from outside without a key. Always finish with the key or thumbturn.
When the gearbox wears, the handle may droop or stop springing back. The one-part fix is the lock case. If the handle gets hard to lift only with the door shut, the door has moved: see door won't lock and how to adjust it before you buy a part.
What is a shoot bolt lock?
A shoot bolt (or shootbolt) is a metal bolt that slides up out of the top of a door into the frame head, and down out of the bottom into the sill. It holds the top and bottom of the door.
You find shootbolts in two places:
- On some main-door locks, as the top and bottom points. Lifting the handle throws them with the rest of the lock.
- On the second door of a pair, such as French doors (HOPPE calls it the inactive door). Its shootbolts are worked by a lifting handle, or by flush-bolt levers in the door's edge.
Shootbolts hold the corners of the door, and they help keep a tall door from bowing.
How do I tell what type of door lock I have?
Open the door and look at its edge.
| What you see on the edge | Lock type |
|---|---|
| One small plate with an angled latch | Knob or lever lock |
| Two small plates: a latch, and a square bolt a few inches above it | Knob or lever plus a deadbolt |
| One tall plate, several inches long, with the latch and bolt both in it | Mortise lock |
| A plate running most of the door's height, with bolts or hooks well above and below the handle | Multipoint lock |
If it is a multipoint lock
Read the stamp on the metal strip in the door's edge, near the latch. The name on the door is the door maker's; the stamp names the lock maker. On a HOPPE HLS 9000 the key sits below the handle.
Five checks, with photos, confirm a manual HOPPE HLS 9000.
Not sure? Use the instant part identifier, or send us a photo of the door's edge. We reply by email within 1 business day.
Questions
What is a key operated multipoint lock?
A multipoint lock that throws all its bolts when you turn the key or thumbturn, with no handle to lift. HOPPE's takes two turns to lock and two to unlock. It is a different lock from the lift-to-lock HLS 9000, so this lock case does not fit it.
How does a multipoint door lock work?
The handle turns the spindle inside the gearbox behind it. The gearbox slides a hidden bar up and down the door's edge, and that bar throws every locking point together. The key or thumbturn throws the deadbolt.
What is a shoot bolt lock?
A lock with bolts that slide up into the frame head and down into the sill. They are the top and bottom points of some main-door locks, and they hold the second door of a pair shut.
How do you identify a multipoint lock?
Open the door. A plate running most of the door's height, with bolts or hooks well above and below the handle, is a multipoint lock. Then read the stamp on that plate for the brand. See the HOPPE checks.
How do I tell what type of door lock I have?
Look at the door's edge with the door open. Small plates mean a knob, lever or deadbolt. One tall plate means a mortise lock. A plate most of the door's height means a multipoint lock.
What if the door is locked shut and won't open?
Don't drill the lock. Call a locksmith or the door installer. If anyone is locked in or in danger, call 911.
The gearbox is the part that wears. See the HOPPE replacement gearbox.
The part
HOPPE HLS 9000 replacement lock case
- Genuine HOPPE part, in six sizes
- Choose your size for price and availability
- Free US shipping and 90-day free returns